Plastic Blow Molding from China Plastic Manufacturers

Your Direct Source Of Plastic Products Manufactured In China
Home About Products Raw Material Quality Links Blog Contact us Sitemaps

Online Catalogue

Injection molding
  Cap & lid
  Jars
  Bucket & Pail
  Auto parts
  Other small components
Plastic Blow molding

  Jerrycan Mold
  Tool box
  Blow Bottle


 

Plastic Blow Molding

Blow molding is another common type of plastic molding. In this process a plastic tubular form, produced by extrusion or injection molding, is used to form the part. This form, called a parison, is softened inside a mold and then injected with air orother compressed gas. This expands the parison against the sides of the moldcavity, forming a hollow object the size and shape of the mold. Blow molding isoften used to produce plastic vessels and containers.

Plastic Closure Suppliers Injection Blow Molding Plastic Packaging Containers



Injection Blow Molding

In the injection blow molding process, the material is injection molded. The hot material, still on the core pin, is then indexed to the blow molding station where it is blown into a bottle and allowed to cool. For processing PET it is critical that this core pin be cooled. The bottle is then indexed to the next station and ejected. Injection blow molding allows more precise detail in the neck and finish (threaded) area than extrusion blow molding. Little, if any, improvement in physical properties is realized in the injection blow molding process since very little orientation occurs. Further, the injection blow molding process is normally limited to the production of relatively small bottles, i.e., 180 mL (6 fluid oz) or less. Eastapak polymer 9921 has been successfully used in the injection stretch blow molded process.

Extrusion Blow Molding

The extrusion blow molding process begins with the conventional extrusion of a parison or tube, using a die similar to that used for making plastic pipe.

The parison is commonly extruded downward between the two halves of an open blow mold. When the parison reaches the proper length, the mold closes, catching and holding the neck end open and pinching the bottom end closed. A rod-like blow pin is inserted into the neck end of the hot parison to simultaneously form the threaded opening and to inflate the parison inside the mold cavity. After the bottle cools, the mold opens to eject the bottle. The excess plastic is trimmed from the neck and bottom pinch-off areas.

Extrusion blow molding:

*Can be used to process many different plastics, including HDPE, PVC, PC, PP, and PETG.
*Requires relatively small capital investment in equipment.
* Is suitable for small production runs.

Stretch Blow Molding

This process involves the production of hollow objects, such as bottles, having biaxial molecular orientation. Biaxial orientation provides enhanced physical properties, clarity, and gas barrier properties, which are all important in products such as bottles for carbonated beverages.

There are two distinct stretch blow molding techniques. In the one-stage process, preforms are injection molded, conditioned to the proper temperature, and blown into containers—all in one continuous process. This technique is most effective in specialty applications, such as widemouthed jars, where very high production rates are not a requirement.

In the two-stage process, preforms are injection molded, stored for a short period of time (typically 1 to 4 days), and blown into containers using a reheat-blow (RHB) machine. Because of the relatively high cost of molding and RHB equipment, this is the best technique for producing high volume items such as carbonated beverage bottles.

 

Home About us Products Raw Material Quality Links Blog Contact us Sitemaps @e-mail
Copyright ©Wuxi Glory Plastics Co.,Ltd.